Estimating

 

 

This article down below on the subject of How to Troubleshoot and Repair an Electric Water Heater is quite insightful. Read it yourself and see what you think about it.

Numerous contemporary homes take advantage of an electric hot water heater for their heating system, as a result of its benefit and also ease of use. Nonetheless, just like any other electric appliances, troubles may develop with its usage, suddenly. It can be actually frustrating to get up to a cool shower rather than a warm one or having your bath with water that isn't warm adequate and even also hot. Whatever the situation might be, water heater troubles can be fairly nerve-racking. Thankfully, we have actually made a list of possible solutions to your water heater concerns. There are a number of elements that can cause a number of these troubles, it could be a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the main power supply for security. Whatever the trouble is, getting it fixed ought to not posture too much of an issue if you comply with these actions:

 

Check Your Power Supply:

As basic as this may appear, it is really necessary. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power issue. Inspect if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, just transform it on and off once more. Replace any damaged or damaged fuse. Examine the device with power after these changes to see if it's currently working.

 

Check the Heating Element in the Water Heater:

If it's not a power issue, after that attempt looking into your burner if it is still functioning. Test each of your heating elements to be sure the problem isn't with any of them. If any of them is faulty, replace that part and then check whether the hot water is back on.

 

Inspect Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open up the accessibility panel as well as press the red button for temperature reset above the thermostat. This ought to help heat the water. Turn the circuit breaker back on and also examine if the trouble has actually been solved.

 

Call A Professional:

If after replacing all faulty components and also resetting your temperature level, the hot water heater still isn't working, you may need to contact an expert plumber for a specialist point of view. The issue with your heating unit could be that the hot and cold taps have actually been switched over or it might be undersized for the amount of hot water required in your house. Whatever the situation may be, a professional plumber would certainly aid fix the issue.

 

Verdict

Water heater problems are not always significant. Much of them are due to small concerns like a blown fuse or worn-out heating element. Changing the malfunctioning parts must work. However, if you are still incapable to fix the problem, give a call to your local plumber ahead to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I'm certainly very eager about How to Troubleshoot and Repair an Electric Water Heater and I hope you appreciated my entry. Be sure to take the time to distribute this write-up if you enjoyed reading it. We recognize the value of reading our article about How to Troubleshoot and Repair an Electric Water Heater.

Schedule Today!